[root] Triangle Away FULL v3.25 APK DOWNLOAD

[root] Triangle Away FULL v3.25 APK DOWNLOAD
Requirements: 2.3.3 and up
Overview: Many Samsung devices store a 
flash counter that keeps track of how many 
times you have flashed *custom* firmwares 
to your device.

Image

On some devices, a yellow triangle or other 
sort of visual warning is also displayed during 
boot if you are running a *custom* firmware. 
TriangleAway was built do disable the 
triangle (if a visual warning is present) and 
reset the custom ROM flash counter to 0. 
This app requires root ! 
You can find out the current status of your 
flash counter and firmware state (custom or 
official) by booting into "download mode" on 

most devices. The usual way of getting into 
"download mode" is by first turning off your 
device, then turning it on by pressing and 
holding volumedown+home+power. 
Alternatively, the "adb reboot download" 
command also often works. 
When you run TriangleAway, if your device 
and firmware are supported, it will show you 
the detected state of the binary (custom or 
official) and flash counter value, and the 
option to "Reset flash counter". Please 
confirm that the information shown is 
correct before resetting the values. 
On a number of devices, TriangleAway can 
work, but your firmware may not be 
supported directly. In that case, the app will 
tell you it needs to reboot into a special boot 
mode, which will be happen if you select 
"Reset flash counter". The device will reboot 
into a special mode which will allow you to 
review the current status and reset the 
binary and flash counter values (or abort and 
do nothing). 
!!! THIS IS A DANGEROUS OPERATION AND 
COULD POTENTIALLY BRICK YOUR DEVICE. 
PROCEED AT YOUR OWN RISK. A USB JIG IS 
PREFERRED IF YOU HAVE A WORKING ONE !!! 
( and by brick I mean brick - only a board 
replacement or a JTAG unit will be able to 
save you, don't mess with boot(loader) stuff 
unless you *really* mean it! ) 
Note#1: using Triangle Away may unmount 
your SD card. Reboot or manually remount it 
from Android settings. 
Note#2: on the SGS3, the "system modified" 
status can only be reset on some firmwares. 
This app has been used successfully on: 
Samsung Galaxy S2: 
- GT-I9100 ** 
Samsung Galaxy Note: 
- GT-N7000 ** 
- GT-I9220 ** 
Samsung Galaxy S3: 
- GT-I9300 ** 
- GT-I9300T ** 
- AT&T 
- Sprint 
- T-Mobile 
- Verizon 
- Canadia 
- US Cellular 
- GT-I9305 LTE ** 
- GT-I9305T LTE ** 
- GT-I9305N LTE ** 
- Korea SHV-E210K/L/S ** 
- Korea SHW-M440S ** 
Samsung Galaxy Note 2: 
- GT-N7100/T ** 
- GT-N7105/T LTE ** 
- SPH-L900 Sprint ** 
- SGH-T889 T-Mobile ** 
- SGH-R950 US Cellular ** 
- SGH-I317/M AT&T/Canada ** 
- SCH-I605 Verizon ** (unlocked bootloader 
only) 
- Korea SHV-E250K/L/S ** 
Samsung Galaxy Camera EK-GC100 ** 
Samsung Galaxy Note 10.1": 
- GT-N8000 3G ** 
- GT-N801x Wi-Fi ** 
- GT-N8020 LTE ** 
- SHW-M480S/K/W ** 
Samsung Galaxy Tab 2: 
- GT-P310x 7" 3G 
- GT-P311x 7" Wi-Fi 
- GT-P510x 10.1" 3G 
- GT-P511x 10.1" Wi-Fi 
** Various related models are supported 
depending on firmware, but only the exact 
model numbers listed are supported 
regardless of firmware version. 
Whether or not Triangle Away works depends 
largely on your kernel. Flashing a different 
kernel may make it work if it previously 
didn't. 
Variants that are NOT based on Exynos 
processors but rather on Qualcomm or Nvidia 
processors are NOT expected to work. I 
honestly would NOT try (until further notice) 
- examples are the Skyrocket and AT&T Note. 
For discussion and technical details, see the 
XDA-Developers.com thread here: 
http://forum.xda-developers.com/ 
showthr ... ?t=1494114 
Note that this download is also available from 
that thread completely for free. You can go 
there and download it for free, or buy me a 
beer and download it from Market. It is 
100% the exact same program

This app has NO advertisements

More Info:
Code:
https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
http://adf.ly/c4Ayw [Direct] 

Mirror: 
http://ul.to/cq0ijja2